NRPavs   SOLD items 2012 archive 1 Mission  780  stand / rear speakers  details
SOLD items 2012 archive 1 product details : 
Mission  780
stand / rear   speakers
Mission  780 stand  speakers  :  inverted  drivers  orientation
Mission  780  rear  speakers  :  front  and back views
Mission  780  stand  / rear  speakers  :  grilles on  and  off
Mission  780  stand  / rear  speakers  :  binding  posts - biwireable
Mission  780  stand  / rear  speakers  :  top  view
Mission  780  stand  / rear  speakers  :  size  scale
  SOLD March 2012, by recommendation, from Oldies but Goodies, to Te Anau
S/Ns: 208003131 / both
 
 
  Mission  780  stand / rear  speakers  specifications                Back to NRPavs Home  
    Mission  model 780  2-way   stand  speakers - black :
   Stand mount or rear 2-way speakers  Black colour with black ash coloured cloth

   AudioEnz 2001 :
   In appearance the Mission is elegant. The drive units are "upside down" compared to most speakers, with the tweeter below the woofer. Both drivers are mounted on a molded plastic baffle, allowing the baffle to curve away from the drive units. The woofer, which produces the bass and midrange, is made from a material that Mission call Keraform. The 130mm woofer crosses over at 2.5kHz to a silk dome tweeter

   The cabinet is of an unusual design. The interior walls are sculpted to scatter internal reflections, while these sculptured areas are filled with acoustic foam. This sort of engineering is only possible because of the computerized routers and other woodworking equipment available today
   Around the back of the speaker are biwirable binding posts and a reflex port


Specifications :
  -:®:-   Enclosure type : 2-way rear ported, bass reflex cabinet
  -:®:-   Drivers : Woofer: 130mm Keraform Cone,   Tweeter: 19mm Silk Dome
  -:®:-   Frequency response : 65Hz to 20kHz 3 dB
  -:®:-   Sensitivity : 87dB SPL / 1m / 2.83V
  -:®:-   Cross-over frequency : 2.5 kHz
  -:®:-   Effective volume : 7.0 litres
  -:®:-   Nominal impedance : 8 ohm compatible
  -:®:-   Recommended amplifier power : 50W 10 150W
  -:®:-   Dimensions [W x H x D] : 165 x 280 x 263mm
  -:®:-   Cabinet finish : Black
  -:®:-   Weight : ~ 7.2kg each - 17kg both packed


   SOLD March 2012, by recommendation, from Oldies But Goodies, to Te Anau












sitemap


Google
www NRPavs




{{ back to the top        Back to Oldies but Goodies  - stand / rear speakers


© NRPavs   2006 - 2012    All Rights reserved