NRPavs   SOLD items 2014 archive 1  Pioneer  VSX-4800  av  receiver  details
SOLD items 2014 archive 1 product details : 

Pioneer  VSX-4800
av   receiver
Pioneer  VSX-4800 av receiver  :  includes CU-VSX026 remote
Pioneer VSX-4800 av receiver  :  top view - depth scale
Pioneer  VSX-4800  av receiver  :  display  closeup
Pioneer VSX-4800 av receiver  :  back  view
Pioneer  VSX-4800  av receiver  :  left  view
Pioneer VSX-4800 av receiver  :  size scale
   SOLD June 2014 on trademe  to Hamilton
S/N: LK1705655 S  remote: CU-VSX026
sitemap              Pioneer  VSX-4800 av receiver  specifications                         Back to NRPavs Home  
      Pioneer  VSX-4800 av receiver - black :
Description :
   In order to connect a wide range of devices to a single home entertainment system, individuals should consider the Pioneer receiver line of technologies
   The Pioneer VSX-4800 receiver is designed with two main speaker outputs, speakers A and B in order to allow more than one speaker system to be hooked up to the receiver without sacrificing control
   This early 5.1 channel receiver is compactly designed with a width of 420mm [16.5in], a height of 125mm [13.5in], and a depth of just 334mm [13.5in] :
   making this receiver a quality option for those who have minimal space and a need for a high-quality receiver
   The Pioneer receiver also comes with a pro-logic surround sound mode that allows users to experience a cinema quality sound experience while at home
   The Pioneer VSX-4800 receiver is constructed with an AM/FM receiver built in to allow for enjoyment of traditional radio signal without the need for an extra device
   This 5.1 channel receiver excels with seven inputs to allow for connection to almost any audio device : The VSX-4800 receiver is designed to provide a hub for a whole home audio entertainment system

Specifications :
  -:®:-   Vintage : 1990 model
  -:®:-   Power : 100 watts x 2 at 0.05% THD [20Hz to 20kHz, 8ohms]
  -:®:-   Surround power : centre: 15W,   rear: 20watts x 2 at 0.08% THD [1kHz, 8ohms]
  -:®:-   Dynamic power : 260W / 280W at [4ohms / 2ohms]
  -:®:-   Frequency response : phono: 20Hz to 20kHz at ± 0.3dB   line: CD/tape1/DAT/tape2/LD/VCR1/VCR2: 5Hz to 70kHz +0dB/-3dB
  -:®:-   Input sensitivity /impedance : Phono: 2.5mV / 47kohms,   line: 150mV/2.2kohms
  -:®:-   Output level / impedance : Tape1/DAT rec, Tape2 rec: 150mV/2.2kohms   VCR1 out / VCR2 out: 150mV/2.2kohms
  -:®:-   Tone : bass: ± 8dB at 100Hz,   treble: ± 8dB at 10kHz,   loudness: +6dB at 100Hz and +3dB at 10kHz
  -:®:-   Signal / Noise : MM: 75dB   line: 97dB

FM :
  -:®:-   Tuning frequency range : 87.5MHz to 108MHz
  -:®:-   Useable sensitivity : mono: 10.8dBf [IHF, 0.95μV/75Ω]
  -:®:-   Quieting sensitivity [-50dB] : mono: 15.3dBF [IHF, 1.6μV/75Ω],   stereo: 37.0dBf [IHF, 19.5μV/75Ω]
  -:®:-   Signal to noise ratio : mono: 80dB [65dBf],   stereo 76dB [85dBf]
  -:®:-   Distortion [1kHz] : mono: 0.2%,   stereo: 0.3%
  -:®:-   Capture ratio : 1dB
  -:®:-   Alternate channel selectivity : 65dB [400kHz]
  -:®:-   Stereo separation : 45dB [1kHz]
  -:®:-   Frequency response : 30Hz to 15kHz [+0.5dB / -2.0dB]
  -:®:-   Image rejection ratio : 50dB
  -:®:-   IF interference ratio : 80dB
  -:®:-   Antenna input : 300Ω unbalanced, 75Ω balanced
AM :
  -:®:-   Tuning frequency range [9kHz / 10kHz steps] : 531kHz to 1602kHz / 530kHz to 1700kHz
  -:®:-   Sensitivity [IHF, lop antenna] : 300μV/m
  -:®:-   Selectivity : 25dB
  -:®:-   Signal to noise ratio : 50dB

  -:®:-   Remote Control : Yes, inlcudes CU-VSX26 remote
  -:®:-   Power consumption: max 660W, on standby: 3.0W
  -:®:-   Dimensions [W x H x D]: 420mm x 125mm x 334mm
  -:®:-   Weight: 9.0kg  - packed 10.5kg

   SOLD June 2014 on trademe  to Hamilton


www NRPavs

{{ back to the top        Back to Oldies but Goodies  - Dolby Pro  ht receivers

© NRPavs   2006 - 2014    All Rights reserved