NRPavs   SOLD items 2014 archive 1  Proton  D540  stereo  amplifier  details
SOLD items 2014 archive 1 product details : 
Proton  D540
stereo  amplifier

SOLD
 
 
Proton  D540   stereo  amplifier
Proton  D540   stereo  amplifier  :  controls  cover  open
 
 
Proton  D540   stereo  amplifier  :  recessed  controls  view
Proton  D540   stereo  amplifier  :  back  view
 
 
Proton  D540   stereo  amplifier  :  top  view
Proton  D540   stereo  amplifier  :  size  scale
   SOLD May 2014, from Oldies but Goodies, to Ngararatunua, Whangarei
S/N: PD54014801
 
 
  Proton  D540 stereo  amplifier specifications                         Back to NRPavs Home  
                 Proton  D540 stereo amplifier - dark  grey :

Features :
   1987 vintage 40W bridgeable stereo amplifier
   No remote control


   In 1987 the D540 won "Audio/Video International" magazine's Hi-Fi Grand Prix award
   The Proton D540 is driven by dual power supplies with Proton's dynamic power on demand technology, which increases headroom
   In a 100 ms test, the amplifier drives 150 watts per channel to an 8 ohm load, 220 watts per channel to a 4 ohm load and 230 watts to a 2 ohm load, and it has 6 dB of headroom
   The D540 has outputs for two sets of stereo speakers [A and B]
   The frequency response curve is from 20Hz to 20 kHz, ± 0.2 dB. At the rated power level, the total harmonic distortion is 0.02 percent, and the intermodulation distortion is 0.06 percent
   Both distortion levels are so low as to be practically negligible
   The damping factor is 90 indicates tight control of difficult speaker loads
   The amplifier has a MM/MC phono input, radio tuner, video, digital audio and two tape inputs with multi-directional dubbing
   The phono preamp has a switchable setting for low-output MC phonograph cartridges or high-output MM cartridges, as well as three-way adjustable capacitance for setting the response of the preamp
   The amplifier is bridgeable, [both channels can be used to drive a common mono load]
   Amplifier has an anti-clipping circuit


Specifications :
  -:®:-    1987 vintage
  -:®:-    Power : 40W RMS at 8 ohms with THD distortion 0.02%
  -:®:-    Dynamic Power [at 8ohms / 4ohms / 2ohms, 20ms]: 160W / 280W / 380W
  -:®:-    Dynamic Power [at 8ohms / 4ohms / 2ohms, 100ms]: 150W / 220W / 230W
  -:®:-    Clipping power [at 8 /4 / 2ohms] : 50W / 80W / 100W
  -:®:-    Dynamic headroom : 6dB
  -:®:-    Damping factor : 90
  -:®:-    Preamp in / outs   can be used a separate preamp or as a power amplifier
  -:®:-    Phono : MM / MC  moving magnet and moving coil - rear switched
  -:®:-    Frequency response : 20 to 20kHz ± 0.2dB
  -:®:-    Power bandwidth at THD 1% : 10Hz to 60kHz
  -:®:-    High level input resistance / capacitance : 40kohm / 220pF
  -:®:-    Line input sensitivity : VIDEO / tape play: 100mV,  phono MM: 2.5mV,  MC [high/low]: 0.2mV / 0.1mV
  -:®:-    Residual noise : 0.4mV
  -:®:-    Channel crosstalk [1kHz] : 90dB / function crosstalk: 80dB
  -:®:-    Signal to noise [unweighted] : Tape / DAD: 90dB,  Phono MM: 80dB,  MC: 68dB
  -:®:-    Bass / Treble : ± 9dB at 100Hz / 10kHz
  -:®:-    Loudness at -30dB : +6dB at 100Hz,  +3dB at 10kHz
  -:®:-    Phono input resistance [MM/MC] : 47kohm / 100ohm
  -:®:-    Phono input capacitance [selectable] : 100pF / 200pF / 320pF
  -:®:-    Phono overload [MM] at 20Hz / 1kHz / 20kHz : 28mV / 280mV / 2.8V
  -:®:-    Phono THD at 4.5V output [MM/MC] : 0.01% / 0.03%
  -:®:-    RIAA response accuracy [MM/MC] : ± 0.2dB / ± 0.5dB
  -:®:-    Speaker outputs : A,  B,  A + B
  -:®:-    Tone controls : Bass,   Bass EQ  Treble  Loudness
  -:®:-    Dimensions [W x H x D]: 420 x 87 x 320mm
  -:®:-    Weight : 8.7kg  - packed weight ~ 10kg


   SOLD May 2014 from Oldies but Goodies, to Ngararatunua, Whangarei












sitemap


Google
www NRPavs




{{ back to the top        Back to Oldies but Goodies  - stereo amplifiers


© NRPavs   2006 - 2014    All Rights reserved