NRPavs   SOLD items 2015 archive 1  Arcam  A60  stereo amplifier  details
SOLD items 2015 archive 1 product details : 
Arcam  A60
stereo amplifier - 1st unit

Arcam  A60  amplifier  :  image #1
Arcam  A60  stereo amplifier  :  top  view
Arcam  A60  amplifier  :  controls closeup
Arcam  A60  stereo amplifier  :  back  view
Arcam  A60  amplifier   :  left  profile
Arcam  A60  stereo amplifier  :  size  scale
   SOLD February 2015 on trademe  to Newton, Auckland
S/N: A60/E1881
sitemap                 Arcam  A60  [1st unit]  stereo amplifier  specifications                         Back to NRPavs Home  
                 A&R Cambridge   A60  stereo amplifier - black :
Description :
   A&R Cambridge A60 slimline stereo amplifier with 5-pin DIN input connections
   HiFi Engine description - The Arcam A60 Amplifier delivers unsurpassed sound quality and performs with its legendary reliability. It is presented in a highly attractive but appealingly restrained cabinet that will continue to please for years to come
   This equipment is genuinely in a class of its own. The A60 can accept any magnetic or moving coil cartridge. The cartridge may be optimally matched by the addition of a switchable loading module and, in the case of a low output moving coil cartridge, the internally fitted MC 60 pre-amplifier board
   All the inputs to the A60 have high overload margins so that almost any input source can be accepted without distortion. A switchable high frequency filter is fitted to reduce the noise from scratches on old records and stereo FM noise on tuners
   The bass and treble controls have been designed so that deficiencies in some small speakers and cartridges may be corrected without coloration of the mid frequency band. All input sockets have high quality silver plated contacts for minimum noise
   The loudspeakers are connected via heavy duty screw terminals which can accept either bare wires or 4mm plugs. Although the speaker sockets are wired directly to the amplifier outputs to obtain the best possible sound quality, switched outputs are also fitted enabling the speakers to be cut out when headphones are plugged in
   Tape recording outputs are provided from both auxiliary and tape sockets, matching the inputs of both cassette and reel-to-reel recorders. The tape button allows source / tape monitoring of the signal when using a tape recorder with separate record and playback heads, while preset replay level controls are provided so that the A and B levels can be equalised
   The amplifier section of the A60 is designed to ensure distortion free drive to loudspeakers of moderate to high efficiency in the most demanding of home listening environments. Maximum power is typically 40 watts per channel into 8 ohm speakers. Electronic protection in the power output stages safeguards against any incorrect loads or short circuits

Specifications :
  -:®:-    Vintage : 1976 model
  -:®:-    Power rating : 35W x 2  [20Hz to 20kHz, at 8ohms],  40W at 1kHz
  -:®:-    Frequency response : 20Hz to 20kHz  [ref 1kHz: +0.5dB, -1.0dB]
  -:®:-    Total harmonic distortion : < 0.2% [20Hz to 20kHz, at 35W rated power],  at 1kHz 0.08%, typically < 0.05%
  -:®:-    Inputs sensitivity / impedance : phono: 2.5mV for 35W,  line [tape in]: 100mV / 100kohm nominal
  -:®:-    Dimensions [W x H x D]: 450 x 60 x 255mm
  -:®:-    Weight : 5.0kg  - packed weight ~ 6.5kg

   SOLD February 2015 on trademe  to Newton, Auckland


www NRPavs

{{ back to the top        Back to Oldies but Goodies  - stereo  amplifiers

© NRPavs   2006 - 2015    All Rights reserved