NAD 306 [1st unit] stereo amplifier - charcoal grey :
The 306 stereo integrated amplifier has power output rated at 50 watts per channel into 8 ohms but with generous headroom permitting untroubled peaks of 160 watts per channel
NAD's unique Soft Clipping and Extended Dynamic Power circuits give the 306 the ability to deliver the maximum impact for dramatic performances without loss of smoothness or clarity
Two sets of heavy duty speaker wire binding posts can be used for main plus extra speakers or for bi-wiring, adding to the 306's versatility
Specifications :
-:®:- Vintage : 1992 to 1995 model
-:®:- Power rating : 50W RMS Continuous power [min RMS per channel 20Hz to 20kHz less than rated distortion into 8 ohms]
-:®:- Rated distortion [THD, 20Hz to 20kHz] : 0.03%
-:®:- Clipping Power : 60W
-:®:- Dynamic headroom : +5dB
-:®:- IHF Dynamic Power : 160W x 2 at 8ohms, at 4ohms: 200W, 2ohms: 250W
-:®:- Bridged mono mode : 100W x 1 at 8ohms
-:®:- Dynamic headroom mono : +6dB
-:®:- Maximum short term power mono : 400W at 8ohms and 500W at 4ohms
-:®:- RIAA response accuracy : ±0.5dB
-:®:- Damping Factor [8 ohms, 50Hz]: > 100
-:®:- Input impedance : MM: R = 47kohms, C = 200pF, MC: R = 100ohms, C = 1μF
-:®:- Input sensitivity : 170mV, phono: MM: 2.6mV, MC: 120μV
-:®:- Signal to Noise Ratio [1W / rated power 50W / MM / MC A-weighted]: 101dB / 118dB / 80dB / 78dB
-:®:- Frequency response : 20Hz to 20kHz ±0.3dB, 2Hz to 80kHz -3dB
-:®:- Tone controls : Bass: ±10dB at 20Hz, Treble: ±7dB at 10kHz, Bass EQ: +3dB at 60Hz and +6dB at 39Hz
-:®:- Dimensions [W x H x D] : 420 x 95 x 350mm
-:®:- Weight : 8.9kg packed weight : 10.5kg
SOLD June 2015 on trademe to Kerikeri
|
