Rotel RX-1000 stereo receiver - black :
Features :
High quality, low distortion 35 Watt stereo receiver
Attractive tuning display, stylish vintage Rotel design, No remote control, Black colour
Specifications :
-:®:- 1976 vintage
-:®:- Power rating : 35W RMS x 2 at 8ohms, THD 0.06%
-:®:- Frequency response : line: 5Hz to 40kHz at +0dB, -1.0dB, phono: 30Hz to 15kHz at ±0.5dB [RIAA]
-:®:- Input sensitivity / Impedance : Tape, Aux: 150mV/30koms, phono: 2.5mV/50kohms
-:®:- Overload level : phono: MM: 180mV, aux: 5V
-:®:- Total Harmonic Distortion : 0.06% at 35W
-:®:- Tape output : 90mV / 80kohms
-:®:- Damping factor [20Hz to 20kHz, 8ohms] : 25
-:®:- Signal to noise ratio : line (Aux / tape): 90dB, phono [MM]: 75dB
-:®:- Tone controls : Bass: ±10dB at 50Hz, treble: ±10dB at 15kHz
-:®:- FM : Usable sensitivity [mono]: 10.8dBf [1.5μF at 75ohms], stereo: 20dBf [5.5μV at 75ohms]
-:®:- Signal to noise ratio [at 65dBf]: mono: 70dB stereo: 65dB
-:®:- Harmonic distortion [65dBf] : 100Hz: mono: 0.1%, stereo: 0.25%, 1kHz: 0.1% / 0.25%, 6kHz: 0.2% / 0.35%
-:®:- Capture ratio : 1.5dB
-:®:- Alternative channel selectivity [±400kHz] : 60dB
-:®:- Spurious response ratio : 70dB, Image response ratio : 55dB
-:®:- AM suppression ratio : 60dB
-:®:- Stereo separation [1kHz / 50Hz to 15kHz] : 40dB / 32dB
-:®:- AM : Sensitivity [IHF] : 200uV /m
-:®:- Selectivity : 30dB
-:®:- Signal to noise ratio : 50dB
-:®:- Dimensions [W x H x D] : 430 x 98 x 290mm
-:®:- Weight : 7.7kg, - packed ~ 9kg
SOLD March 2105 on trademe to Wellington
|
