Kenwood DA-9010 stereo amplifier - black :
The Kenwood DA-9010 model is a late 1980s large format stereo integrated amplifier, featuring ability for analogue or digital input sources, rated at 100W RMS
Analogue and digital input [coaxial and optical for DBS / VDP 2 only], digital input select is fixed, with substitute knob, no remote
Specifications :
-:®:- 1989 vintage
-:®:- Power rating : 100W RMS at 8ohms [THD 0.015%]
-:®:- Dynamic power [8ohms/4ohms/2ohms] : 140W / 230W / 340W
-:®:- Total harmonic distortion : Aux: 0.015% [at rated power, 8ohms]
-:®:- Frequency response : 5Hz to 90kHz +0dB, -3dB
-:®:- Speaker outputs : A, B, A + B : speakers impedance 4 to 16 ohms
-:®:- Headphones out : 6.3mm jack
-:®:- Damping factor : 150 [50Hz at 8ohms]
-:®:- Analogue or digital inputs [DBS / VDP 2 only] : front switched
-:®:- Input sensitivity / Impedance : phono [MM]: 2.5mV / 47kohms, MC: 0.2V, 100ohms, line: 150mV / 47kohms
-:®:- Signal to noise ratio [IHF-A] : 78dB [MM] for 2.5mV, 73dB for 0.25mV input, line [tuner / Aux / tape]: 80dB
-:®:- Output : 150mV (line) [2.2koms]
-:®:- Tone controls : bass: ±10dB at 100Hz, treble: ±10dB at 10kHz, bass intensifier: +9dB at 20Hz, +3dB at 100Hz, subsonic filter:
-:®:- Speaker load impedance : 4ohms to 16ohms
-:®:- Dimensions [W x H x D] : 440 x 162 x 422mm
-:®:- Weight : 18kg, - packed ~ 19.5kg
SOLD January 2017 on trademe to Albany, Auckland
|
