NRPavs   SOLD items 2017 archive 1  NAD  7000  stereo receiver 2nd unit  details
SOLD items 2017 archive 1 product details : 
NAD  7000
stereo  receiver  - 2nd unit
SOLD
NAD  7000  stereo  receiver  :  front  view
NAD  7000  stereo receiver  :  right  top  view
NAD  7000  stereo  receiver  :  controls  closeup
NAD  7000  stereo receiver  :  back  view
NAD  7000  stereo  receiver  :  top  view
NAD  7000  stereo receiver  :  size  scale
   SOLD April 2017 on trademe  to Wellington
S/N: T70010484
 
 
  sitemap    NAD  7000  [2nd unit]  stereo receiver   specifications                         Back to NRPavs Home  
   NAD   7000  [2nd unit]  stereo receiver  - charcoal grey :                 

  • Late 1980s Monitor series stereo receiver,  remote capable
  • 40W RMS, Power envelope technology
  • 200W Dynamic power
  • + 6dB dynamic headroom [IHF]
  • Soft clipping
  • Pre out / Main in [remove links to connect an external power amplifier]
  • 5-way speaker binding posts
  • Bass EQ
  • Speaker impedance selector
  • MM / MC front switched with discrete 4 transistor phono preamp circuit
  • Phono input sockets gold plated
  • 14 AM / FM preset memories


Specifications :
  -:®:-    Vintage : 1988 model
   PRE-AMP SECTION :
  -:®:-    Phono input : Input impedance (R and C): 47k ohm / 100pF
  -:®:-    Input sensitivity [1kHz] : 0.35mV ref. 40W
  -:®:-    Signal to Noise ratio (A-weighted with cartridge connected) : 75dB ref. 5mV
  -:®:-    THD (20Hz to 20kHz) < 0.04%   RIAA response accuracy [20Hz to 20kHz] : ±0.5dB
   Line level inputs :   Input impedance (R and C) 50k ohms / 500pF
  -:®:-    Input sensitivity [ref. 40W] : 80mV
  -:®:-    Maximum input signal : > 10V
  -:®:-    Signal to Noise ratio [A-weighted ref 1W / 40W] : 88dB / 104dB
  -:®:-    Frequency response [20Hz to 20kHz] : +0.5dB, -1.0dB
  -:®:-    Infrasonic filter : -3db at 12Hz, 12dB/octave
   Line level outputs :   Output impedance : Pre-amp 500 ohms   Tape Source Z + 1k ohms   Phones : 100 ohms
  -:®:-    Maximum output level : 10V   Tape : 10V  Phones > 8V into 600ohms, > 500mV into 8ohms
   POWER AMP SECTION :
  -:®:-    Continuous output power into 8 ohms 40 Watts (14dBW)at rated distortion :(THD 20Hz to 20kHz) : 0.03%
  -:®:-    Clipping power [maximum continuous power per channel] : 50W
  -:®:-    IHF Dynamic headroom at 8 ohms : +6dB
  -:®:-    IHF dynamic power [maximum short term power per channel] : 8 ohms 160W (22dBW),   4 ohms 200W (23dBW),    2 ohms 250W (24dBW)
  -:®:-    Damping factor [ref. 8 ohms, 50Hz] : > 50
  -:®:-    Input impedance : 47k ohms / 100pF  Input sensitivity (for rated power into 8 ohms) : 1V
  -:®:-    Frequency response : 12Hz to 45kHz  +0dB, -3dB
  -:®:-    Signal to noise ratio [ref. 1W] : 100dB   ref. rated power : 114dB with THD (20Hz to 20kHz) < 0.03%

   FM TUNER SECTION :
  -:®:-    Input sensitivity : Mono: 30dB S/N : 11dBf [1.0μV/300ohms]   Stereo: 50dB S/N : 36dBf [17μV/300ohms]
  -:®:-    Capture ratio [45dBf to 65dBf] : < 1.6dB
  -:®:-    Selectivity, alternate channel : 68dB   Image rejection : 60dB
  -:®:-    Harmonic distortion : Mono 0.1%    Stereo 0.1%
  -:®:-    Signal to Noise ratio : Mono > 82dB    Stereo > 76dB
  -:®:-    Frequency response [±0.5dB} : 30Hz to 15kHz   Channel separation at 1kHz : 50dB

   AM TUNER SECTION :
  -:®:-    Usable sensitivity : 5μV   Selectivity : 30dB   Image rejection : 50dB   IF rejection : 45dB
  -:®:-    Signal / Noise ratio : 45dB   Harmonic distortion : 0.5%
  -:®:-    Dimensions [W x H x D]: 435 x 106 x 389mm   Weight : 8.2kg,  packed weight: 10kg


   SOLD April 2017 on trademe  to Wellington












sitemap


Google
www NRPavs




{{ back to the top        Back to Oldies but Goodies  - stereo  receivers


© NRPavs   2006 - 2017    All Rights reserved