Rotel RX-950AX stereo receiver - black :
Features :
High quality, low distortion 50 Watt stereo receiver
Clean layout - typical Rotel no frills design, includes RR-905 remote control, Black colour
Includes operating manual
Specifications :
-:®:- Vintage : 1992 model
-:®:- Power rating : 50W RMS x 2 at 8ohms, THD 0.05%
-:®:- Dynamic power : 85W [DIN 1% THD, 4ohms, 1kHz]
-:®:- Frequency response : line: 20Hz to 20kHz +0dB / -1.0dB, phono: 20Hz to 20kHz at ±0.3dB [RIAA]
-:®:- Output : speakers: 4ohms minimum, headphones: 8 to 2kohms
-:®:- Damping factor : 100 [20Hz to 20kHz, 8ohms]
-:®:- Signal to noise ratio [IHF A-weighted] : phono: 82dB, line: CD / AV / tape1, 2
-:®:- Input sensitivity / impedance : line level: 150mV / 20kohms, phono: 2.5mV / 47kohms
-:®:- Total Harmonic Distortion : 0.03%
-:®:- Tone controls : Bass: ±6dB at 100Hz, treble: ±6dB at 10kHz
-:®:- FM : Usable sensitivity [mono]: 10.8dBf [0.95μF]
-:®:- Quieting [-50dB] sensitivity [75ohms]: mono: 14.8dBf [1.5μF], stereo: 37.2dBf [20μF]
-:®:- Signal to noise ratio [at 65dBf]: mono: 80dB, stereo: 75dB
-:®:- Harmonic distortion [65dBf] : mono: 0.07%, stereo: 0.25%
-:®:- Frequency response : 30Hz to 14kHz ±1.5dB
-:®:- Capture ratio : 1.0
-:®:- Alternative channel selectivity [±400kHz] : 63dB
-:®:- Spurious response ratio : 95dB, Image response ratio : 45dB, IF response ratio : 90dB
-:®:- AM suppression ratio : 58dB
-:®:- Stereo separation [100Hz / 1kHz / 10kHz] : 43dB / 36dB / 38dB
-:®:- AM : Sensitivity : 350uV /m
-:®:- Selectivity : 35dB
-:®:- Signal to noise ratio : 55dB
-:®:- Image response ratio : 40dB
-:®:- IF response ratio : 60dB
-:®:- Dimensions [W x H x D] : 440 x 121 x 340mm
-:®:- Weight : 9.0kg, - packed ~ 10.5kg
SOLD February 2017 on trademe to Bluff
|
