Rotel RX-975 stereo receiver - black :
Features :
High quality, low distortion 100 Watt stereo receiver
Clean layout - typical Rotel no frills design, includes RR-949 remote control, Black colour
Includes operating manual
Specifications :
-:®:- Vintage : 2000 model
-:®:- Power rating : 100W RMS x 2 at 8ohms, THD 0.05%
-:®:- Frequency response : line: 10Hz to 70kHz ± 3dB, phono: 20Hz to 20kHz at ±1.5dB [RIAA]
-:®:- Signal to noise ratio [IHF A-weighted] : 92dB
-:®:- Input overlaod : line: 5V, phono: > 120mV
-:®:- Preamplifier output voltage : 1.1V
-:®:- Input sensitivity / impedance : line level: 200mV / 47kohms, phono: 3.1mV / 47kohms
-:®:- Total Harmonic Distortion : 0.05%
-:®:- Tone controls : Bass: ±8dB at 100Hz, treble: ±8dB at 10kHz
-:®:- FM : Usable sensitivity [mono]: 14.2dBf
-:®:- Quieting [-50dB] sensitivity [75ohms]: mono: 20.2dBf, stereo: 45.3dBf
-:®:- Signal to noise ratio [at 65dBf]: mono: 70dB, stereo: 65dB
-:®:- Harmonic distortion [65dBf] : mono: 0.3%, stereo: 0.5%
-:®:- Frequency response : 30Hz to 14kHz ±1.5dB
-:®:- Capture ratio : 2.0
-:®:- Alternative channel selectivity [±400kHz] : 47dB
-:®:- Spurious response ratio : 80dB, Image response ratio : 70dB, IF response ratio : 65dB
-:®:- AM suppression ration : 52dB
-:®:- Stereo separation [100Hz / 1kHz / 10kHz] : 40dB / 45dB / 35dB
-:®:- FM output level : 550mV
-:®:- AM : Sensitivity : 500uV /m
-:®:- Selectivity : 25dB
-:®:- Signal to noise ratio : 40dB
-:®:- Image response ratio : 35dB
-:®:- Output level : 160mV
-:®:- Dimensions [W x H x D] : 450 x 158 x 400mm
-:®:- Weight : 11.5kg, - packed ~ 13kg
SOLD January 2017 on trademe to Westport
|
