Kenwood KR-A4040 stereo receiver - black :
The Kenwood KR-A4040 model is a late 1980s, early 1990s stereo receiver rated at 55W RMS
Specifications :
-:®:- Vintage : 1992 model
-:®:- Power rating : 55W RMS at 8 ohms [20Hz to 20kHz, THD 0.09%
-:®:- Total harmonic distortion : 0.09% [30Hz to 20kHz, at 50W, 8ohms]
-:®:- Speaker outputs : A, B, A + B, speakers impedance 4 to 16 ohms [front switched]
-:®:- Headphones out : 6.3mm jack
-:®:- Frequency response : 10Hz to 70kHz [+0dB, -3dB]
-:®:- Signal to noise : Phono: 76dB for 6mV input line: CD / tuner / Video/ tape: 100dB for 200mV input
-:®:- Input sensitivity / impedance : Phono: MM: 2.5mV at 47kohms, CD / tuner / Video/ tape: 200mV for 47kohms
-:®:- Headphones output : Yes
-:®:- Tone controls : bass: ±10dB at 100Hz, treble: ±10dB at 10kHz
-:®:- FM: Tuning frequencies: 87.5MHz to 108MHz
-:®:- Sensitivity : 10.8dBf [0.9μV, 75ohms]
-:®:- Quieting sensitivity [-50dB] : mono: 16.2dBf [3.5μV at 75ohms], stereo: 38.2dBf [45μV at 75ohms]
-:®:- Signal to noise ratio [65dBf] : mono: 79dB, stereo: 73dB
-:®:- Total harmonic distortion : mono: 0.3%, stereo: 0.5%
-:®:- Stereo separation : 45dB [IHF at 1kHz]
-:®:- Frequency response : 30Hz to 15kHz [+0.5dB, -2dB]
-:®:- AM : tuning frequencies: 530kHz to 1610kHz [10kHz steps]
-:®:- Usable sensitivity : 12μV, [400μV/m]
-:®:- Signal to noise ratio : 50dB
-:®:- Total harmonic distortion : 0.5%
-:®:- Selectivity : 23dB
-:®:- Dimensions [W x H x D]: 440 x 129 x 284mm
-:®:- Weight : 5.5kg, packed weight : ~ 7kg
SOLD May 2019 on trademe to Wellington
|
