NRPavs   SOLD items 2010 archive 2  B&W  CM2  tower monitors - 2nd pair  details
SOLD items 2010 archive 2 product details : 
Bowers & Wilkins
B&W  CM2
tower  monitors  - 2nd pair

Bowers & Wilkins B&W CM2  Concept 90 tower speakers
B&W CM2  :  right profile

B&W CM2  2nd pair  backs  view
B&W CM2   operating manual : detailed specifications

B&W CM2   :  subs connect to CM1 mini monitor
B&W CM2   :  size  scale
SOLD July 2010 by selection from Oldies but Goodies, to Mt Roskill, Auckland
S/Ns:  CM2s: 08307 / 08308  with top CM1s: 11595 / 11596
 
 
  Bowers and Wilkins  CM2   speakers  - 2nd pair  specifications                Back to NRPavs Home  
   B&W  CM2  matrix  tower subwoofer and monitors - 2nd pair [black CM1s / black CM2 towers] :
Dark grey colour    Unique plastic CM1 stand and fittings for CM2 column back-firing twin subwoofers
Very flat frequency response : 48 - 20kHz     lower bass point : -6dB at 36Hz    input power : 50 - 200 Watts with APOC protection circuit


The CM1 / CM2 monitor loudspeaker system developed by the B&W engineers using their patented computer-based Matrix speaker design technique, that is unique to this fine British Loudspeaker manufacturer. What is extraordinary about this particular speaker system is its uncanny ability to reproduce a full sound stage of music from a relative small speaker columns. The small CM1 unit can also be matched with any other subwoofer for full-range sound reproduction, was due to famed B&W engineer, Kenneth Grange, who sought to develop a small elegant enclosure system that produced a large, accurate musical experience.

Much that one finds in today's B&W models such as the Matrix cabinet system [ for removing unwanted and sound distorting back waves from the enclosure ] and the Kevlar woven speaker cones is present in this earlier expression of their engineering genius. The system is made up of two distinct but perfectly synchronized units: (1) The CM1 monitor is comprised of a Nautilus tube-loaded 1" aluminum dome tweeter combined with a 5" Kevlar fiber cone bass / midrange driver that produces an amazing 55 Hz to 33 kHz +/- 3dB frequency range, with (2) addition of the CM2 subwoofer this extends down to 48Hz at -1.5dB and 36Hz at -6dB.

Hence, most of the key musical information is covered by this highly accurate monitor, from the lowest frequency, detailed and airy plucked string bass notes to the highest frequency percussion instruments and cymbals. The midrange is smooth and musical, while still providing the greatest detail and stable imaging.

The CM2 back-firing bass drivers have a peak excursion of up to 20mm, and have super large magnets that are bigger than the effective cone area of the driver in size. This permits the extended low frequency response from such a sleek elegant column design

Power rating is 50 - 200W RMS, yet in cases of excessive amplification the system is also safely protected with the B&W APOC protection circuit

Specifications :
  -:®:-   Drivers : 1 x 26mm metal dome tweeter, 1 x 126mm Kevlar cone bass / midrange, 2 x 130mm bass drivers
  -:®:-   Sensitivity : 85dB / 1W / 1m
  -:®:-   Frequency response : 48Hz - 20kHz +/- 1.5dB  36Hz - 40kHz at -6dB
  -:®:-   Impedance : nominal 8 ohms [ not less than 4ohms ]
  -:®:-   Dimensions [ W x D x H ]: 162 x 211 x 955mm
  -:®:-   Weight : 2 x boxes - for CM1s: 13kg,  - for two column sections: ~ 23.0kg with mounting bits
  -:®:-   Personal delivery to Auckland at $25 is an excellent option


   SOLD July 2010 by selection from Oldies but Goodies, to Mt Roskill, Auckland












sitemap


Google
www NRPavs




{{ back to the top        Back to Oldies but Goodies  - front speakers


© NRPavs   2006 - 2010    All Rights reserved