Rotel RX-875 stereo receiver - black :
Features :
High quality, low distortion 70 Watt stereo receiver
Clean layout - typical Rotel no frills design, No remote control, Black colour
Dual mono construction - can be bridged for high power one channel mono
Specifications :
-:®:- 1987 vintage
-:®:- Power rating : 70W RMS x 2 at 8ohms, THD 0.03%
-:®:- Dynamic power : 120W DIN at 4 ohms, 1kHz, 1% THD
-:®:- Bridged power (mono) : 120W [20Hz to 20kHz] at 8ohms and 0.03% THD
-:®:- Frequency response : line: 20 to 30kHz at [+0.0dB / -1.0dB], phono: 20 to 15kHz at ±0.2dB [RIAA]
-:®:- Input sensitivity / Impedance : CD, Tape, Video: 150mV/47koms, phono: MM: 2.5mV/47kohms, MC: 200μV/200ohms
-:®:- Overload level : phono: MC: 27mV, MM: 300mV, line: 10V [THD 0.5%, 1kHz]
-:®:- Total Harmonic Distortion : 0.03%
-:®:- Damping factor [20 to 20kHz 8ohms] : 280
-:®:- Signal / noise ratio : line (cd/tape/video): 102dB, phono [MC/MM]: 70dB / 80dB
-:®:- Tone controls : Bass: ±10dB at 100Hz, treble: ±10dB at 10kHz
-:®:- FM : Usable sensitivity [mono]: 10.8dBf [0.9μF at 75ohms]
-:®:- Quieting [-50dB] sensitivity [75ohms]: mono: 15.2dBf / 1.5μF, stereo: 37.2dBf / 20μF
-:®:- Signal to noise ratio [at 65dBf]: mono: 80dB, stereo: 75dB
-:®:- Harmonic distortion [65dBf] : mono: 0.07%, stereo: 0.25%
-:®:- Frequency response : 30Hz to 15kHz ±1dB
-:®:- Capture ratio : 1.0
-:®:- Alternative channel selectivity [±400kHz] : 63dB
-:®:- Spurious response ratio : 95dB, Image response ratio : 70dB, IF response ratio : 95dB
-:®:- AM suppression ration : 58dB
-:®:- Stereo separation [100Hz / 1kHz / 10kHz] : 43dB / 46dB / 38dB
-:®:- AM : Sensitivity : 350μV /m
-:®:- Selectivity : 27dB [wide], [narrow]: 42dB
-:®:- Signal to noise ratio : 60dB
-:®:- Image response ratio : 40dB, IF response ratio: 40dB
-:®:- Dimensions [W x H x D] : 430 x 117 x 330mm
-:®:- Weight : 13.5kg, - packed ~ 15kg
SOLD December 2012 on trademe to Waihi
|
