Nakamichi Receiver 3 stereo receiver - dark grey
Specifications :
-:®:- Vintage : 1990 model
-:®:- Power : 37W RMS [20Hz to 20kHz, at rated THD distortion 0.1%]
-:®:- Dynamic power : 45W at 8ohms, 55W at 4ohms
-:®:- Peak output current : 14A per channel
-:®:- Frequency response : 20Hz to 22kHz [+0dB / -0.5dB], 5Hz to 75KHz [+0dB / -3dB]
-:®:- Dynamic power : 55W at 8ohms, 70W at 4ohms
-:®:- Power bandwidth : 10Hz to 40kHz
-:®:- Frequency response : 20Hz to 20kHz [±1dB], 10Hz to 50kHz [+1.0dB, -3dB]
-:®:- Signal to noise : > 98dB at rated power, 83dB [IHF A-202 weighted]
-:®:- Total harmonic distortion : < 0.1%
-:®:- Output current capability : 10A per channel
FM :
-:®:- Tuning frequencies : 87.5MHz to 107.9MHz [200kHz steps]
-:®:- Usable sensitivity : mono: 12.2dBf / 2.2μV
-:®:- Quieting sensitivity [-50dB] : mono: 15.7dBF / 3.3μV, stereo: 38.5dBf / 46.1μV
-:®:- Signal to noise ratio [65dBf] : mono: > 78dB, stereo: 69dB
-:®:- Muting threshold : 30dBf / 17.3μV
-:®:- Frequency response : 30Hz to 15kHz ±1.5dB
-:®:- Total harmonic distortion : mono: < 0.15%, stereo: 0.20%
-:®:- Capture ratio : 2dB
-:®:- Alternate channel selectivity : 55dB [±400kHz]
-:®:- Stereo separation [1kHz] : > 45dB
-:®:- Spurious response rejection : > 80dB
-:®:- Image rejection : > 47dB, IF rejection: > 80dB, AM suppression: > 60dB
AM :
-:®:- Frequency range : 510kHz to 1710kHz [10kHz steps]
-:®:- Sensitivity : 53dBμ/m
-:®:- Signal to noise [at 90dBμ/m] : > 52dB
-:®:- Total harmonic distortion [at 90dBμ/m] : < 0.5%
-:®:- Selectivity : > 20dB [± 10kHz]
-:®:- Headphone output : 86mW [at 40ohms]
-:®:- Dimensions [W x H x D]: 430 x 100 x 275mm
-:®:- Weight : 6kg, - packed 7.5kg
The Receiver 3 is supplied with a Receiver 2 remote controller
SOLD December 2014 on trademe to Mangawhai
|
