Rotel RX-802 stereo receiver - black :
Features :
High quality, low distortion 50 Watt stereo receiver
Attractive tuning display, stylish vintage Rotel design, No remote control, Black colour
Specifications :
-:®:- 1975 vintage
-:®:- Power rating : 50W RMS x 2 at 8ohms, THD 0.5%
-:®:- Frequency response : line: 10Hz to 100kHz at ±3dB, phono: 20Hz to 20kHz at ±0.5dB [RIAA]
-:®:- Input sensitivity / Impedance : Main in: 1000mV/34kohms, Tape, Aux 1, 2: 140mV/26koms, phono 1 , 2: 2.4mV, 6.4mV/40kohms
-:®:- Overload level : phono: MM: 150mV
-:®:- Total Harmonic Distortion : 0.5%
-:®:- Tape output : 280mV / 1.7kohms
-:®:- Damping factor [1kHz, 8ohms] : 40
-:®:- Signal to noise ratio : line (tape): 80dB, phono [MM]: 65dB
-:®:- Tone controls : Bass: ±10dB at 100Hz, treble: ±10dB at 10kHz
-:®:- FM : Usable sensitivity [mono]: 1.5uF at 75ohms
-:®:- Signal to noise ratio [at 65dBf]: mono: 70dB
-:®:- Harmonic distortion [65dBf] : mono: 0.2%, stereo: 0.4%
-:®:- Capture ratio : 1.0
-:®:- Alternative channel selectivity [±400kHz] : 80dB
-:®:- Spurious response ratio : 100dB, Image rejection : 100dB
-:®:- AM suppression ratio : 55dB
-:®:- Stereo separation [100Hz / 1kHz / 10kHz] : 40dB / 40dB / 35dB
-:®:- AM : Sensitivity [IHF] : 15uV /m
-:®:- Selectivity : 50dB
-:®:- Signal to noise ratio : 50dB
-:®:- Image rejection : 80dB
-:®:- Dimensions [W x H x D] : 610 x 137 x 381mm
-:®:- Weight : 13.5kg, - packed ~ 15kg
SOLD December 2014 on trademe to Dunedin
|
