Kenwood KR-A4060 stereo receiver - black :
The Kenwood KR-A4060 model is a 1994 to 1995 model stereo receiver rated at 85W RMS
Specifications :
-:®:- Vintage : 1994 to 1995 model
-:®:- Power rating : 85W RMS at 8 ohms [20Hz to 20kHz, THD 0.09%
-:®:- Total harmonic distortion : Line CD / Video 1, 2 / tape 1, 2: to speaker out: 0.03% [20Hz to 20kHz, at 40W, 8ohms]
-:®:- Speaker outputs : A, B, A + B, speakers impedance 4 to 16 ohms [front switched]
-:®:- Headphones out : 6.3mm jack
-:®:- Frequency response : 20Hz to 20kHz [±0.5dB]
-:®:- Signal to noise : Phono: 70dB line: CD / Video 1, 2 / tape 1, 2: 100dB
-:®:- Input sensitivity / impedance : Phono: MM: 2.5mV at 47kohms, CD / tuner / Video / tape: 200mV for 47kohms
-:®:- Headphones output : Yes
-:®:- Tone controls : bass: ±10dB at 100Hz, treble: ±10dB at 10kHz, loudness: [-30dB level] +8dB at 100Hz
-:®:- FM: Tuning frequencies: 87.5MHz to 108MHz
-:®:- Sensitivity : 13.2dBf [1.2μV, 75ohms]
-:®:- Quieting sensitivity [-50dB] : stereo: 41.2dBf [32μV at 75ohms]
-:®:- Signal to noise ratio : mono: 75dB, stereo: 68dB
-:®:- Total harmonic distortion : mono: 0.6%, stereo: 0.7%
-:®:- Stereo separation : 40dB [IHF at 1kHz]
-:®:- Frequency response : 30Hz to 15kHz [+0.5dB, -3dB]
-:®:- AM : tuning frequencies: 531kHz to 1611kHz [10kHz steps]
-:®:- Usable sensitivity : 100μV/m
-:®:- Signal to noise ratio : 48dB
-:®:- Total harmonic distortion : 0.7%
-:®:- Selectivity : 30dB
-:®:- Dimensions [W x H x D]: 440 x 133 x 329mm
-:®:- Weight : 8.1kg, packed weight : ~ 10kg
SOLD November 2019 on trademe to Whangarei
|
