Yamaha RX-395 [1st unit] stereo receiver - black :
Features :
2005 vintage 50W receiver , sorry no controller
40 station AM/FM station memory presets
Stations can be directly accessed using numeric keys for frequency
Tuner automatically sets the best reception FM settings
Loudness control : variable -30dB to flat
Specifications :
-:®:- Vintage : 1997 model
-:®:- Power : 45W RMS at 8 ohms with THD distortion 0.04%
-:®:- Dynamic power [IHF, 8/6/4/2ohms] : 68W / 75W / 85W / 95W
-:®:- Total Harmonic distortion : Phono to rec out [20Hz to 20kHz], 3V]: 0.02% [CD/Tape/etc to speaker out, 22.5W]: 0.02%
-:®:- Frequency response : 20Hz to 20kHz, ±0.5dB [CD/Tape/etc], Pure direct on: 10Hz to 100kHz ±1.0dB
-:®:- Damping factor : > 100 at 8ohms, 1kHz [speakers A]
-:®:- Input sensitivity and impedance : CD/tape play: 150mV / 47kohms, phono: 2.5mV / 47kohms
-:®:- Signal to noise ratio : Phono: > 82dB [Pure direct on, IHF A-weighted], CD/tape : > 108dB
FM :
-:®:- Tuning frequency : 87.5MHz to 108.00MHz [50kHz steps]
-:®:- Usable sensitivity : mono: 9.3dBf, 0.8μV [30 S/N quieting, 1kHz, 100% mod]
-:®:- Harmonic distortion [1kHz] : Mono: 0.1%, stereo: 0.2%
-:®:- Frequency response : 20Hz to 15kHz 0 ±1.5dB
-:®:- Stereo separation : 50dB at 1kHz
AM :
-:®:- Tuning Frequency : 531 to 1611 [9kHz steps]
-:®:- Usable sensitivity : 100μV
-:®:- AM selectivity : 32dB, Signal to noise ratio AM: 50dB
-:®:- Phono : MM moving magnet [RIAA 20Hz to 20kHz ±0.5dB]
-:®:- Preset memory : 40 x AM or FM station stored preset [8 x 5 x banks A1 to E8]
-:®:- Speaker outputs : A, B, A + B
-:®:- Tone controls : Bass: ±10dB at 50Hz, turnover freq: 350Hz, Treble: ±10dB at 20kHz, turnover freq: 3.5kHz Loudness: continuous from flat to -30dB level [1kHz]
-:®:- Dimensions [W x H x D]: 435 x 146 x 308.5mm
-:®:- Weight : 6.5kg - packed weight ~ 8kg
SOLD November 2021 on trademe to Paihia
|
