NRPavs   SOLD items 2023 archive 2  Mission  707  [1st pair]  stand / rear  speakers  details
SOLD items 2023 archive 2 product details : 
Mission  707
stand  speakers - 1st pair
SOLD
Mission  707  stand / rear  speakers  :  web image #1  - inverted drivers
Mission  707  stand / rear  speakers  :  web image #2  - upward  view
Mission  707  stand / rear  speakers  :  image #3
Mission  707  stand / rear  speakers  :  backs  view  - actual units
Mission  707  stand / rear  speakers  :  image #5
Mission  707  stand / rear  speakers  :  image #6
   SOLD October 2023 on  trademe  to Christchurch
S/Ns: 835973 / both
 
 
sitemap                Mission  707  [1st pair]  stand  speakers  specifications                Back to NRPavs Home  
    Mission  707  [1st pair]  stand / rear  speaker - front white / black ash :
   Front vented box, inverted drivers, 2-way   speakers :
   The Mission 707 front vents are damped with honeycomb pattern, plastic straws


   Mission of the UK introduced the 707 model in the mid 1980s
   HiFi Review :
   The Mission 707 proved to be an exceptionally balanced and clean-sounding speaker. While its apparent bass was not as strong as our measurements might imply
   (remember, bass response is strongly affected by a speaker's acoustic environment), it was certainly not lacking in any substantive respect
   The smoothness and wide range of the speaker’s output was evident from first listening, and these qualities more than compensated for any real or imagined limitations in the lowest audible octaves
   The Model 707 is not only an exceptionally efficient small speaker, but it is one that can handle huge dynamic-power inputs without damage or serious distortion
   This quality implies that it can be played quite loud, and more important, that it can produce the high peak levels of CDs and the best LPs
   From its externals, there is little to show that the Mission 707 is more than “just another bookshelf speaker”
   It is light in weight, low in price, unpretentious in styling and finish (we thought our black-finished samples had a rather utilitarian appearance), and hardly unique in its specifications

   However, a few minutes of listening (before making any measurements) left us with a strong impression that this speaker had been designed by someone with definite goals and the ability to realize them in practice
   Although the Mission 707 is rather low priced by today’s standards, it has the smoothness and balance of a far more expensive speaker

   A lot of things have been done right in its creation, and the proof is in the listening


Specifications :
  -:®:-   Vintage : 1984 to 1985 model
  -:®:-   Enclosure type : 2-way front vented, inverted drivers - tweeter lower
  -:®:-   Frequency response: 50Hz to 20kHz
  -:®:-   Power input rating : 20 to 100watts
  -:®:-   Finish : White front baffle / Black ash
  -:®:-   Impedance : 6 ohms
  -:®:-   Sensitivity : 92dB [2.83V / 1m]
  -:®:-   Crossover frequency : 2.7kHz
  -:®:-   Effective volume : 25lt
  -:®:-   Drive units: HF: 19mm (0.8") polymer dome, ferro fluid cooled  LF: 210mm (8.27") Plasiflex woofer
  -:®:-   Input connectors : banana capable and bare wire binding posts
  -:®:-   Cabinet dimensions [W x H x D] : 250 x 470 x 270mm
  -:®:-   Weight : 7.3kg each,  - packed each: 9kg,  or 16kg one box


   SOLD October 2023 on  trademe  to Christchurch











sitemap


Google
www NRPavs




{{ back to the top        Back to Oldies but Goodies  - stand / rear  speakers


© NRPavs   2006 - 2022    All Rights reserved