NRPavs   SOLD items 2015 archive 1  Paradigm  5se mkIII floor  speaker  details
SOLD items 2015 archive 1 product details : 
Paradigm  5se mkIII
floor  speakers
Paradigm  5se mkIII   speakers  :  no grilles
Paradigm  5se mkIII   speakers  :  image #2
Paradigm  5se mkIII   speakers  :  image #3
Paradigm  5se mkIII   speakers  :  backs  view
Paradigm  5se mkIII   speakers  :  image #5
Paradigm  5se mkIII  speakers  :  image #6
   SOLD March 2015, from Oldies but Goodies and recommendation, to Whangarei
S/Ns: none   no grilles
  Paradigm  5se mkIII stand speakers  specifications                         Back to NRPavs Home  
  Paradigm  5se mkIII  stand speakers - black :
Description :
   Paradigm's many advanced features are incorporated into this classically popular Paradigm design
   The result is an extremely cost-effective, high-performance speaker system
   The 5se mkIII provides natural, uncoloured, three-dimensional music reproduction
   It has high power handling, extended bass response and very low distortion
   A quintessential Paradigm speaker, the 5se mkIII offers unparalleled cost/performance - an astounding value

   Drivers : mkIII Series high-frequency drivers : Features include: treated textile domes with less than 0.28gm of moving mass,
   unique coupling faceplate chassis for wide-dispersion and maximally flat frequency response, high temperature voice-coils and ventilated aluminium formers
   Ferro-fluid damped and cooled. Barium ferrite magnets. Replaceable diaphragm

   Bass/mid-frequency drivers: Features include: high-pressure diecast aluminum chassis, co-polymer polypropylene cones,
   high-hysteresis progressively-damped synthetic butyl suspensions, high-temperature multi-layer voice-coils, kapton formers
   Low distortion symmetrically focused-field magnetic assemblies. Barium ferrite magnets

   Black oak sides / no grilles with this pair
   2-way : 8" woofer,   1" textile dome tweeter

Specifications :
  -:®:-   Vintage : 1993 model
  -:®:-   Two driver vertical array, front vented box
  -:®:-   Power rating : 15W to 100W RMS
  -:®:-   Impedance : 8 ohms
  -:®:-   Cosmetic : Black oak sides / matt light grey front baffle colour,  no grilles
  -:®:-   Design : 2-driver, 2-way bass reflex. Quasi-3rd order resistive port
  -:®:-   Crossover : 2nd order electro/acoustic at 2.2kHz
  -:®:-   Drivers : One 25mm (1") mkIII, high-frequency driver,  One 210mm (8") mkIII, bass/midrange driver
  -:®:-   Frequency response : Low Frequency Extension: 32Hz (DIN)
  -:®:-   Frequency Response On Axis (0°); ±2dB from 57Hz to 20kHz
  -:®:-   Frequency Response Off Axis (30°); ±2dB from 57Hz to 15kHz
  -:®:-   Sensitivity [Room/Anechoic] : 90dB / 87dB
  -:®:-   Suitable Amplifier Power Range : 15 to 150 watts
  -:®:-   Maximum Input Power : 100 watts
  -:®:-   Nominal / Minimum Impedance : 8ohms / 4ohms
  -:®:-   Internal Volume : 40litres (1.4cubic ft)
  -:®:-   Dimensions: [W x H x D]: 240 x 850 x 300mm
  -:®:-   Weight : ~ 14.5kg each - packed weight 16kg each

   SOLD March 2015, from Oldies but Goodies and recommendation, to Whangarei


www NRPavs

{{ back to the top        Back to Oldies but Goodies  - stand / rear  speakers

© NRPavs   2006 - 2015    All Rights reserved